You can also see the magnet in the waist socket firmly glued in, I decided not to replace this one, the socket and existing magnet provide enough force and friction to hold the torso firmly on the waist without movement.
Here is a closer pict capture before the internal bulkhead was fitted. The missing array of vents /exhausts on the rear of the carapace in-between the Armour panels was replaced with an armoured sheet from an IG vehicle and two 'exhausts' from the Cities of Death buildings frames.
The armour trim was given two coats of Vallejo Brass and the stripes tidied up where the paint had bled on the tape edges.The Armour Trim was washed with Reikland Fleshshade and Astorum decal applied, and gloss coated for protection - this will get a further lacquer coat later so the decal edges won't be so visible.
The completed Torso
Proudly displaying the Certificate of Authenticity number No.3615
Thanks for dropping in to check my progress, cheers, Siph.