Deathwatch Captain with Jump Pack - DONE!

Hello All,

This week's offering is a Deathwatch Captain with Jump Pack. The model has had magnets added to allow hot swapping of his wargear. Moreover, the same smoke stack base has been used to allow the model to appear 'floating' on the tabletop.

The model was painted with the same style as the others, with details picked up again to match the growing force.

Power Fist and Bolter. Modelled with a skull head, I think its befitting of a CC monster!

Power Sword and Plasma Pistol - point to the enemy!

Chainsword and Flamer - I really like the Primaris head on this model, I've angled the helmet with the magnet slightly so that he is looking upwards

And I had to chuck him into the AI tool..

Thanks for swinging by! LH (11pts - additional 1 for extra heads and arms)

WIP - Deathwatch Captain with Jump Pack

Hello all,

This weeks offering is a couple of WIP pics of my Deathwatch Captain, with Jump pack. This model has been magnetised to allow hot swap of all the weapons on the sprue, and head options. Moreover, there is a 3D printed smoke stack, rather than the silly flimsy flying bases.

The model has had the same scheme as per my Deathwatch, with the jump pack having additional flashes of red to the vents. There is also an addition of a Primaris Relictor Helmet to the base.. what happened to the marine in question is a mystery.

Thanks for stopping by. LH

Relictors Chapter Primaris Space Marines - Gravis Captain

Hello All, thanks for dropping by. This week's addition to the vast Relictors Battle Companies is a character to lead the fledgling Primaris contingent, a Gravis Captain. This is also from the initial release of Primaris Marines way back with the "Dark Imperium" starter set.

Primaris Gravis Armour is a heavy-duty, thick-plated suit of power armour for Primaris Space Marines, designed for frontline, close-quarters combat, offering superior protection over standard Tacticus armor but slightly less than Terminator armour, excelling at holding ground with heavy firepower and resilience, featuring large power plants, chunky designs, and often used by elite units.

I added a tactical rock underfoot, and the sword is a replacement as I did model him with a power scythe at first for a now abandoned Emperor's Scythes force...

The cloak is Karak Stone layered with Ushabti Bone, washed Sepia and highlighted Ushabti Bone. Gives a dirty cotton look.

Not sure what to add next from my Primaris forces, maybe a squad for the annual Squaduary event next month? Maybe Infernus Marines, or looong overdue First Strike minis...

Anyone else participating this old blogger tradition?

Cheers, Siph (10pts)

WIP - Deathwatch Assault Marines and Jump Captain

Hello!

Quick post, just some little WIP shots of some of my assault Deathwatch, and Jump Pack Captain. These guys have self printed smoke stacks, I'm not using the silly flimsy clear flying stands - these are slightly higher, but not too much to be called 'gamey' :)

Normal Deathwatch scheme, hopefully can get these done in the next week!

Cheers! LH

Tyberos the Red Wake - Deathwatch Terminator Captain - DONE!

Hello one and all, thanks for swinging by! For review this week is a partially 3D printed conversion using the Forge World Tyberos the Red Wake model. 

Reaper Lord of the Void, is the Chapter Master or "Shade Lord" of the Carcharodons Chapter of Space Marines and Ship's Master of the fabled battle barge 'Nicor'. He also serves simultaneously as Company Master of the Carcharodons' elite 1st Company, better known as the "Red Brethren".

I've got the OG FW version, but for me, wasn't tall enough, even back when released - this one utilities a much taller base, with then the additions of the arms and top chest/head of the OG. I've also added green stuff, and a larger cape.

The model was finished in the same style of the Deathwatch, with a metallic base. This one has had plenty of blood added to the arms and claws.

The base is also 3D printed, with a dead Primaris Space Marine on it.

Thanks for stopping by! LH (10pts)

Relictors Space Marine Chapter - Terminator Captain w/ Thunder Hammer

Hello Readers, thanks for dropping by. I have added a Terminator Captain to my extensive Relictors Battle Companies. These are obviously 1st Company which bolster the 5th and 4th Companies. This was the Blood Angel Captain from the Start Collecting boxset.

I removed all the blood drops I could find, leaving only the leg greave, blood-drop engraved bolt casing and the leather pterges.

In place of the blood drops, I added Crux Terminatus icons, on the chain to front and back and Thunder Hammer. And I added a 'tactical' Storm Talon engine nacell of some unfortunate Ultramarine to stand on, (maybe Lord H's?) angling the head and arm to look downwards slightly. 

The shoulder already comes with a raised Skull icon, which suits my vast array of Relictors badges already done using the skull decal, swapping only recently to the custom side-skull decals, so this one can stay as.

Cheers, Siph (10pts)

Deathwatch Primaris Captains - Done!

Hello one and all.. I'm still here!

This weeks offering is 2 Primaris Captains for my Deathwatch force.

First Captain, this captain - from the Brotherhood of a Thousand chapter is the standard Gravis captain, with a space wolves head swap. The armour has been painted as per other Deathwatch forces, with the addition of a purple power sword.

Up next, is Captain 2.. Similar to some of my Deathwatch force, the Captain has had the Power Sword swapped with one of the Necron power weapons, I like the idea of the Deathwatch accessing enemies weapons to fight them.. This model also has had the addition of a 3D printed 'Skywalker' head.

Overall, happy with the look of these two. 

Thanks for stopping by. LH (20pts)

Deathwatch Space Marines - More Captains! Done!

Hello one and all!

Sorry for the lack of posts on my side, its been a busy few weeks, however there are big updates soon!

This weeks offerings are two Deathwatch Captains, these are 'home made' and are taken from a well known 3D printing site.

Centurion Captain

This guy I had to have the moment I saw the file, the model was flipped so the shoulder pauldrons were correct. I've painted the same style as my other Deathwatch, the model is armed with a chain blade and flamer, in game this could be a Terminator captain, or house rules. The model had a back pack added to finish.

Gravis Captain

This guy is a 'hit!' I wanted to have models that look imposing on the battle, and this guy does for sure! He has had his left arm mirrored from the right, with some purity seals added. I've also added a skull helm which was purchased from an auction site prior to me getting my printer. Again, finished off with the same scheme as the DW.

Thanks for swinging by! LH (20pts)

Deathwatch Marines - Reivers and more Characters - Done!

Hello all,

A crazy few weeks, but have got several bits complete to add to the growing Deathwatch force. I've got done, a Captain, a Lieutenant, 5 Reivers and a DKK Siege Drill

Captain

I've completed a Deathwatch firstborn Captain with a Jump pack, armed with a Thunder Hammer and Shield, The perfect combo for full assault tactics! The Marine is from the Sons Of Medusa Chapter.

Lieutenant

This marine has been sitting in the pile of shame for some time - this was a Games Day I picked up years ago, based on the cover art for 2nd Ed (I believe..) I've converted the Left arm so that he now has the DW symbol on his pauldron. The model has been painted with the normal DW scheme, with touches of the original art - the flame patterns and Yellow Bolter!

5 Reivers

These guys have had parts from other minis added, and then used the same style of 'camo' as my Eliminator squad- with the Tau inspired camo phasing from camo to armour. Really happy with how these guys look. I am really happy with the Serg' who appears to be going 'SShhhhhh...' to his next victim.. very Ork Kommando-style!

Death Korps of Krieg Siege Drill

It was with the Krieg stuff years ago and I believe bought at a Games Day some 15 years ago.. I've opted for a DW style scheme for this - I can image the DW using it to penetrate a Necron tomb, or other Xeno threat! 

Thanks for looking! LH (30pts)