Hello Readers, thanks for dropping in. Here is my latest addition to the Adeptus Mechanicus Cult Mechanicum forces, two more Kastelan Robots. The first pair of robots I have are armed with Power Fists, but this time I wanted some shooty robots, what the Mechanicum do well is Heavy Phosphor Blasters! Three Shots, S6, AP3, 36in and same again with Twin Linked.
I went of a darker scheme than the first two done by blogger buddy Mordian7th, but the blue power cables and tan sections will tie them in with the other pair. I don't like the heads that GW provides, they look too much like helmets with visors from Lost In Space.... "Danger Danger Robinson Family"... these heads are from Wargame Exclusive dot com.
I went for a pose with both of these, shooty in your face, both arms firing, and the pintle mount too. That's Heavy Phosphor Blasters and TL Heavy Phosphor Blasters, with the addition of -1 to Cover to other shots for the rest of the phase if something is hit and wounded - Phosphor lights them up nicely!
So nice, I did the same pose twice!
On the base I used one of the face plates that I don't like, and shot two holes through it and added a Chaos Star... heretic scum Dark Mechanicus...
Here is one next to the original robots painted by blogger buddy Mordian7th.
And finally, a shot of the Robot Maniple with their Datasmith. Thanks for dropping by, cheers, Siph.
Hello Readers, I recently picked up a pile of Grey Knights, some unpainted, some painted and some WIP from Jeff at Pirate Viking Painting. I had already randomly picked up Interrogator Chaplain Seraphicus from Jeff in the past so I knew he can be trusted and the standard of his work is of a great standard, so the bargain of the month was not to be sniffed at - I am a hobby butterfly and these will help me bounce between projects keeping me motivated. I had already painted a Psycannon armed Grey Knight for myself so these kinda cemented that foray into yet another Allied Force I could have some fun with...
Here is a shot of the WIP state I received the Contemptor in, not too bad a starting point eh?
So, to satisfy my hobby butterfly, I thought I'd see if I could do a decent job finishing off the Contemptor. The Terminators and Strike Team already done by Jeff will only require matching basing and my Psycannon Grey Knight only needed another Asurmen Blue wash to fit in nicely, so I am confident I can expand the force to look whole as I add units, I've always wanted a Dreadknight or two after facing them from Lord Halfpenny's side of the battlefield.
I toned down the blue glaze over the carapace by stippling on Runefang Steel, drybrushed the magazines Brass to break up the Leadbelcher area, did the head, kneepads, shoulder icons, exhausts and purity seals and based the same as all my armies and this was the result.
I added a tiny skull to the shoulder badge where there is raised detail and echoed this on the kneepad with a Black Skull and crenelated pattern too.
The base was finished off with a wrecked Iron Warrior bike from my bits box, 6thDegree plays Iron Warriors so it fits right in. I will play this as a normal or Venerable Grey Knight Dreadnought as I cannot find Grey Knight Contemptor rules even though these I guess are Grey Knight FW Shoulders? ###EDIT### seen that these are FW etched brass icons on 'normal' Contemptor Dreadnought arms, sweet.
Hi, I thought I'd have a little work related fun at lunchtime one work day and see if I could remember all my Relictors Forces and tote up what I have already bought and need to complete.... I know I get distracted by new hobby purchases and a long running joke is my lack of ability to finish off an actual Battle Company - I am precisely 2 Marines away from that goal!! One Veteran with Banner and one Company Champion for the WIP Command Squad... well Mordian7th is great at putting up To-Do Charts and sticking to them, me less so.
Anyway, there you go... a lot of Relictors as can be seen by the chart above and a Parade Ground photo from Feb this year, and some To-Do; and yet no actual Battle Company per se yet...
Hello readers, thanks for dropping by, well I promised it would be something more shooty in my last post so here is my latest addition to the Relictors Battle Company, a mighty Leviathan Dreadnought armed with Storm Cannons.
I painted this beast the same scheme as my usual Relictors, Codex Grey, washed Nuln Oil, highlighted Administratum Grey. The base was Calthan Brown, drybrushed with both Kommando Khaki and Ushabti Bone.
I drybrushed the cannons, and to add some interest with gold recoil springs and Leadbelcher hydraulic cylinders. I wanted them to look industrial and heavily used.
The under mechanical bits were also Leadbelcher drybrushed and then I did the grey. The exhaust ports were weathered with a little Tin Bitz to look aged.
I can't wait to unleash the firepower of this Dreadnought, I opted to model the Missiles too. More dakka is always a welcome addition.
The longer term plan will be to get another Leviathan, but armed with a Siege Claw and Siege Drill for lots of close combat goodness, I might even get a Dreadnought Drop Pod so I can deliver him into the enemy lines.
And for all those who are interested in how big this beast is, a size comparison shot of the Dreadnought with its smaller gun happy brothers, a 'normal' Rifleman, and a Kheres Assault Cannon Relic Contemptor. This Leviathan is huge and bulky.
And finally, a shot with a Battle Brother, yep big...
Hello Readers, thanks for dropping in, I picked up a squad of RTB01 from a well known auction site recently, for a bargain of about a quid each, so even cheaper in the States now Brexit happened! ;) I already had a squad of my own from 1980's, but I thought I'd actually paint some up as Relictors to add to my ever growing (2nd) Battle Company - I mean 5th COY is almost complete, now I add units to the 4th COY....
The sculpts required quite a lot of clean up and mold-line removing, we just didn't care as much back in those days, this squad have some serious glue splodge issues too... the sculpt itself holds its own over time, nowhere near the level of posability or crisp details as the latest Tactical Squad, but I think these Classic marines look cool on 32mm bases.
I used the same colours and accents I usually do, brass magazines, red eyes, gloss Pauldrons, and based the same. I painted the powerpack vents metallic as they lack the detail of the new kits so looked better all metallic with a black dot on the underside rather than a grille.
Here is a size comparison shot of a modern Devastator, an RTB01 and the newest oldest LE2 Imperial Space Marine anniversary miniature.
As you can see against a normal MK7 Tactical Marine, the RTB01 is squatting a little and has thinner leg greaves, but overall I think these will blend into the Battle Company quite well. Just the other nine to paint up, I have had to add a FW Bolt Pistol to the squad Sergeant as an empty hand was lacking, plus a grenade holding hand on another marine as the poses were fairly limited if the left hand wasn't under the bolter casing, it was a closed empty fist.
Thanks for reading and I'll post some progress of something more shooty soon! Cheers, Siph.
This blog is in no way endorsed by, or directly connected to, Games Workshop Group PLC.
As this blog is a reflection / presentation of our hobby - it is important to point out that the copyright for the GW miniatures remains with Games Workshop.
For a full disclaimer, please read the bottom of this webpage.