8 Feb 2019

Legio Crucius - Warbringer Nemesis Titan - WIP #5 Quake Cannon

Hi All,.
It’s been a slow week, however I have spent some time with the Warbringer - mainly the Quake cannon.

I wanted to have it where the canon could be move into position to fire - with vertical movement. Initially I tried with magnets - however due to the weight, the cannon would be pulled to the horizontal axis.

So I added a 'lock and key' mechanism to allow the movement of the cannon. A pin was added within the housing, and then an adjacent hole was drilled into the vertical support. I then scored the resin to show the direction of movement, and added to more holes, and then the resin was removed between the holes with a knife. This allows the cannon to be set into 3 positions, upright, a semi erect position and a firing straight ahead position
I am really happy with the way this turned out, allowing the model to be positioned mid game will add more realism to the model. I can't wait to see the Warbringer in action..

Cheers LH

4 comments:

  1. Great idea! Still looks like one shot from that bad boy would put the titan on its back...

    ReplyDelete
    Replies
    1. In theory it can! Macro 3D6 S20 -5AP flat 6 Dmg... so upto 108dmg... but more likely 12-35dmg... after taking into account random number and to-wound and Void saves.

      Delete
    2. Make that a potential 216dmg with Macro Rule!

      Delete
  2. Humph.



    Does it have a bayonet ?

    ReplyDelete

For the Emperor! (and other Xenos welcome...)